Skip to main content

ASIC Miner ICERIVER KAS KS0 Profitability

ASIC Miner ICERIVER KAS KS0 Profitability In the realm of cryptocurrency mining, the Iceriver KAS KS0 miner has garnered widespread attention. Tailored specifically for the Kaspa network's KHeavyHash algorithm, it boasts high hashing power and low power consumption, making it an ideal choice for many miners. In this article, we will comprehensively assess IceRiver KS0 profitability while considering the Kaspa market conditions and the attributes of KS0 miner. Kaspa Market Dynamics Kaspa is a vibrant cryptocurrency network aimed at delivering high performance and scalability for everyday transactions. At the time of writing this article, the Kaspa coin trades at approximately $0.04959. But it's essential to note that cryptocurrency markets are highly susceptible to price volatility. Hence, investors must remain vigilant about market dynamics. Additionally, the Kaspa network's mining difficulty and reward mechanisms play a role in mining returns. Attributes of the IceRiver KS

Antminer S19 and S19 pro profit comparison

Antminer S19 and S19 pro profit comparison

Antminer S19 and S19 Pro were released in 2020, and both use Bitcoin SHA-256 algorithm ASIC miners with 7nm ASIC chip technology.
Antminer S19 has a maximum hash rate of 95TH/s and power consumption of 3250W.
Antminer S19

Antminer S19

The maximum hash rate of Antminer S19 Pro is 110TH/s. Its power consumption is 3250W. It is more profitable than Antminer S17 pro and S17+76TH.
Antminer S19 Pro
Antminer S19 Pro

Antminer S19 and S19 Pro specifications comparison:

Version

Antminer S19

Antminer S19 Pro

Model No.

240-Ca

240-C

Crypto Algorithm/Coins 

SHA256/BTC/BCH 

SHA256/BTC/BCH

Hashrate, TH/s

95 ± 3%

110 ± 3%

Power consumption on wall @25°C, Watt 

3250 ± 5%

3250 ± 5%

Power efficiency on wall @25°C, J/TH 

34.5 ± 5%

29.5 ± 5%

Net weight, kg(2-2)

14.2

13.2

Gross weight, kg

16.0

15.2

Operation temperature,°C 

0~40

0~40

Storage temperature,°C 

-20~70

-20~70

Operation altitude, m(3-1)

10~90%

10~90%

To prevent the virus from spreading in the firmware, causing damage and damage to the Antminer S19 series, the safe boot setting has been powered on, and the root permission setting function has been closed.
The maximum working temperature of the equipment will decrease by 1℃ for every increase of 300m.
The maximum temperature condition is 40°C.
The device has two AC input cables; each cable is 10A.

Calculation Parameters

Version

Antminer S19

Antminer S19 Pro

Power Consumption (Watts)

3250 W

3250 W

Electricity Cost (per KWh)

$0.1

$0.1

Coin

Bitcoin

Bitcoin

Manufacturer

BITMAIN

BITMAIN

Hash rate

95 TH/s

110 TH/s

Algorithm

SHA-256

SHA-256

Payback

132 days

151 days

Duration

226 days

256 days


Estimated Power Cost

Daily Power Cost

$7.8

Weekly Power Cost

$54.60

Monthly Power Cost

$234.00

Annual Power Cost

$2,847.00


Estimated Revenue W/O Cost

Version

Antminer S19

Antminer S19 Pro

Daily Revenue

$31.14

$36.06

Weekly Revenue

$217.98

$252.42

Monthly Revenue

$934.20

$1,081.80

Annual Revenue

$11,366.10

$13,161.90


Estimated Profit After Cost

Version

Antminer S19

Antminer S19 Pro

Daily Profit

$23.34

$28.26

Weekly Profit

$163.38

$197.82

Monthly Profit

$700.20

$847.80

Annual Profit

$8,519.10

$10,314.90

Disclaimer:
The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.

Comments

Popular posts from this blog

How to repair ASIC miner hash board

How to repair ASIC miner hash board Important parts of ASIC miners – Hash board One  ASIC miner consists of 3 to 5 Hash board, a control board, a casing, and software, among which the Hash board are easiest  to broken. because the ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder due to high temperature which makes the hash board or the mining machine unable to work and no hash rate. How to quickly detective which chips broken it’s the most important when we repairing ASIC miners The Antminer chips fixture fast efficient and easy to use Bitmain Antminer repair inspection tool The ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder du

How to repair antminer T17 Hashboard and repair guide manual download

How to repair antminer T17 Hashboard and repair guide manual download This version contains the basic circuit schematic diagram and chip signal direction and voltage introduction We currently publish in Chinese and the English version will be released soon Basic overview: Antminer T17 single hash board uses a total of 30 hash chips, the model is "BM1397", and the signal direction is sequentially transmitted from U1 to U30. Signal direction: "CLK / CO / BO / RST", transferred from U1 to U30, "RI" is transferred from U30 to U1 It also passes 5 test points for testing and maintenance The five test points are: CLK-CO-RI-BO-RST (Please note: The location of the test points in different voltage domains are also different, please refer to the picture notes) For notes and instructions on the test points, please see the following articles: The whole board has 30 chips, divided into 10 voltage domains, and each voltage domain contains 3 chips For the description of

Antminer APW9 and APW9+ Power Supply Repair Guide

Antminer APW9 and APW9+ Power Supply Repair Guide Apw9 Apw9+ is a high-power PSU with 2 single-phase AC inputs and 2   DC outputs. 1: 14.5v-21v voltage adjustable output, maximum current 170A 2: 12v voltage fixed output, maximum current 12A The circuit board layout is mainly divided into: 1A - The first AC input and EMI circuit 1B - PFC and MOS circuit 1C - 12V auxiliary circuit and VCC circuit 2A -  2nd AC input and EMI circuit 2B - PFC and MOS circuit 2C - 12V auxiliary circuit and VCC circuit 2D - 12V output port and PIC communication port   The vulnerable parts of PSU are: fuse, MOS, rectifier bridge A more detailed circuit diagram is provided in the document for  Reference See more details here  Antminer manuals and repair guide