Skip to main content

By the end of 2024, Bitcoin price is expected to reach $100,000! The crypto bull market is back

By the end of 2024, Bitcoin price is expected to reach $100,000! The crypto bull market is back. Bitcoin, the top cryptocurrency, could hit $100,000 by the end of 2024, according to a report by Jeff Kendrick, head of digital asset research at Standard Chartered Bank. By the end of 2024, we could see Bitcoin (BTC) reaching the $100,000 level , as we believe the much-hyped "crypto winter" is finally over. According to Kendrick, Bitcoin could benefit from many factors. For example, recent instability in the banking sector due to the end of the Fed's rate hike cycle and the increased profitability of cryptocurrency mining. As uncertainty persists, Kendrick believes the path to the $100,000 level is becoming more apparent. Bitcoin has bounced back this year, topping $30,000 for the first time in 10 months. However, the crypto industry lost trillions of dollars in 2022 after the Fed raised interest rates. Observers Are Arguing About Bitcoin Standard Chartered isn't the only

What is the Avalon 920 921 power module unit?

What is the Avalon 920 921 power module unit?

PMU, or Power Management Unit, is a highly integrated power management solution for portable applications. It integrates traditional separate types of power management devices, such as DC/DC converters (DC/DC), low dropout linear regulators (LDO) into one package, which can achieve higher power conversion efficiency and lower power consumption, and lower component count to accommodate shrinking board space, lower cost.
PMU is generally composed of three parts: DC/DC switching power supply, LDO low-dropout linear stable power supply, and resistance and capacitance of the control part. The PMU is generally customized and bound to the main chip.
The Avalon 920 921 PMU, as a power management integrated unit for a specific main chip, can provide the Avalon miner 920 921 with all the power supplies of multiple grades and different voltages required by the main chip. The Avalon 920 921 Power Module Unit contains the L and R two parts into one power management unit. According to the needs of the main chip, power management, charging control, and switch control circuits are integrated.
Avalon 920 921 PMU
Avalon 920 921 Power Module Unit has built-in over/under voltage (OVP/UVP), over-temperature (OTP), over current (OCP), and other protection circuits, which can be safely and transparently distributed between USB and external AC adapter, lithium battery, and application system load, so that all units can work typically. To save energy, the device is also equipped with a switch control circuit and charging control.
Avalon 921 Power Management Unit

Avalon 920 921 PMU product details:

Place of Origin

China

Brand Name
Avalon Miner
Video Memory Capacity
256mb
Products Status
Stock
Rating Power
>1000W
Encryption
yes
Output Interface Type
Other
Chipset Manufacturer
Avalon Miner
Material
metal
Capacity
256mb
Style
Other
Memory Interface
64 Bit
Memory Clock(Mhz)
other
Interface Type
USB 2.0, USB 2.0
Video Memory Type
DDR3
Color
Silver
Min. Hole Size
0.20mm
Working temperature
-10℃ to 70℃
Base Material
FR-4
Min. Line Width
3mm
In integrated circuits, PMU mainly has the following functions:
1. The chip system usually uses different voltages. When the power is turned on and off, if the sequence and time required by the chip are not strictly followed, not only can the system not be started, but the chip will be burned in severe cases.
2. When the semiconductor circuit is working, the working current will be significant and small; that is to say, the load is not constant. For the circuit that provides the power supply, when the load changes, the power supply circuit should be able to keep the voltage obtained by the loaded chip unchanged.
3. Sometimes, the power supply voltage used by the system may be unstable, which requires the output of the power supply circuit to be stable under the fluctuation of the input voltage.
4. In order to save power, the primary consideration is the battery power supply system, and the unused power supply should be turned off as much as possible.
In order to match the power-on sequence of the CPU, after the CPU works typically, each module of the PMIC can be controlled through the I2C interface. For example, different operating frequencies need to adjust the core voltage to the corresponding voltage when the system frequency conversion. In addition, the more power supplies of the PMIC, the finer the power supply to the modules of the system, and the less the power supply of each module is involved, so the more power is saved.

Comments

Popular posts from this blog

How to repair antminer T17 Hashboard and repair guide manual download

How to repair antminer T17 Hashboard and repair guide manual download This version contains the basic circuit schematic diagram and chip signal direction and voltage introduction We currently publish in Chinese and the English version will be released soon Basic overview: Antminer T17 single hash board uses a total of 30 hash chips, the model is "BM1397", and the signal direction is sequentially transmitted from U1 to U30. Signal direction: "CLK / CO / BO / RST", transferred from U1 to U30, "RI" is transferred from U30 to U1 It also passes 5 test points for testing and maintenance The five test points are: CLK-CO-RI-BO-RST (Please note: The location of the test points in different voltage domains are also different, please refer to the picture notes) For notes and instructions on the test points, please see the following articles: The whole board has 30 chips, divided into 10 voltage domains, and each voltage domain contains 3 chips For the description of

How to repair ASIC miner hash board

How to repair ASIC miner hash board Important parts of ASIC miners – Hash board One  ASIC miner consists of 3 to 5 Hash board, a control board, a casing, and software, among which the Hash board are easiest  to broken. because the ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder due to high temperature which makes the hash board or the mining machine unable to work and no hash rate. How to quickly detective which chips broken it’s the most important when we repairing ASIC miners The Antminer chips fixture fast efficient and easy to use Bitmain Antminer repair inspection tool The ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder du

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board?

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board? Antminer S9 hash board Antminer S9 hash board power supply unit Voltage and ground value test of Antminer S9 power supply unit 12V voltage test Test method: adjust the Fluke 15B+ multimeter to the DC gear; the red test lead is placed on the positive pole of the power interface of the hash board, and the black test lead is placed on the negative pole of the power interface. PIC chip voltage test There is a white dot next to the PIC chip, which is 1st Pin. Test method : Adjust the Fluke 15B+ multimeter to the DC gear, measure whether the 1st Pin of the PIC chip has output, and the normal voltage is about 3.3V. If there is no 3.3V, please check the connection status of the hash board test line to see if the hash board is normal; if not, you need to re-program the PIC. MOS tube voltage test There is a black dot on the MOS tube, which is the 1st Pin (Figure 1). This is because the voltage of t