Skip to main content

In 2023, is it suitable to use miners to mine or buy coins?

In 2023, is it suitable to use miners to mine or buy coins? In recent years, with the increasing popularity of blockchain technology and the rapid development of digital currency, more and more people have joined the team of mining and buying of coins. In 2023, for most people, choosing to use a miner to mine or buy coins will be a critical decision. Advantages and disadvantages of miners High power consumption, high cost, and high technical requirements are the salient features of miners' mining. But at the same time, miners also have a stable income from mining and have the advantage of controlling the speed of block verification. Here are a few viable Bitcoin miners and their profitability in 2023. Antminer S19 Pro is a miner produced by Bitmain , which is very popular in the market. It is equipped with 114 BM1398 ASIC chips , which can achieve a faster and more stable mining experience. It is estimated that the average daily income of this type of miner in 2023 will exceed 120
Post a Comment

Antminer S9j profitability

Antminer S9j profitability

Antminer S9j is a BTC, Nicehash, LCC, BSV, BCH, PPC, BTE, DGB, UNIT, and DEM miner, using SHA-256 algorithm ASIC miner, using 16nm ASIC chip technology. The chip is sold and traded by ZEUS MINING, and the design comes from Bitmain Technologies, which is based in Beijing, China.
The Bitmain Antminer S9j was released in August 2018. It is produced with Bitmain’s 16nm chip and is known as the world’s most power-efficient Bitcoin miner.
The Bitmain Antminer S9j enables users to mine Bitcoin with a maximum hash rate of 14.5TH/s and power consumption of 1350W, with a power efficiency of 93.12 J/TH + 10% and an A dimension of 445mm (L) * 215mm (W ) * 255mm (H), 2* 12038 fan cooling.

Bitmain Antminer S9 Specifications:

Manufacturer
Bitmain
Model
Antminer S9j 14TH/s
Antminer S9j 14.5TH/S
Release time
August 2018
August 2018
Hash rate
14T ±5%
14.5T ±5%
Power consumption
1350W + 10% (on the wall, APW3, 93% efficiency, 25C ambient temperature)
1350W + 10% (on the wall, APW3, 93% efficiency, 25C ambient temperature)
Power Efficiency
93.12 J/TH + 10% (at wall, APW3 efficiency 93%, ambient temperature 25°C)
93.12 J/TH + 10% (at wall, APW3 efficiency 93%, ambient temperature 25°C)
Rated voltage
11.60 ~13.00V
11.60 ~13.00V
Number of chips
189*BM1387
189*BM1387
Size
445mm(L)*215mm(W)*255mm(H)
445mm(L)*215mm(W)*255mm(H)
Heat dissipation
2*12038 fans
2*12038 fans
Noise level
76db
76db
Operating temperature
0 - 40°C
0 - 40°C
Internet connection
Ethernet
Ethernet
Default frequency
auto-configuration
auto-configuration
Antminer S9j Hash Board
Notice:
This device contains a power supply unit (PSU) and a power code.
Antminer S9 accepts an input voltage of 220V.
Antminer S9 is not equipped with a power supply and needs to be used with an APW3++ power supply.
Users should use the equipment following the specifications and instructions; any wrong input voltage may cause the miner to stop working.
Bitmain Antminer S9 Profit Show:
Estimated Power Cost
Model
Antminer S9j 14TH/s
Antminer S9j 14.5TH/S
Daily Power Cost
$3.24
$3.24
Weekly Power Cost
$22.68
$22.68
Monthly Power Cost
$97.20
$97.20
Annual Power Cost
$1,182.60
$1,182.60
Estimated Revenue W/O Cost
Model
Antminer S9j 14TH/s
Antminer S9j 14.5TH/S
Daily Revenue
$3.06
$3.17
Weekly Revenue
$21.42
$22.19
Monthly Revenue
$91.80
$95.10
Annual Revenue
$1,116.90
$1,157.05
Estimated Profit After Cost
Model
Antminer S9j 14TH/s
Antminer S9j 14.5TH/S
Daily Profit
$-0.18
$-0.07
Weekly Profit
$-1.26
$-0.49
Monthly Profit
$-5.40
$-2.10
Annual Profit
$-65.70
$-25.55
Disclaimer: 
The above income statement is a rough estimate based on known miner data. The actual value may be different from the table value. The above table is only intended to provide insights and ideas for those who wish to purchase this.
The content and pictures of this article are from the Internet, compiled and edited by ZEUS MINING.

Labels:

Comments

Post a Comment

Tell us your opinion

Popular posts from this blog

How to repair antminer T17 Hashboard and repair guide manual download

How to repair antminer T17 Hashboard and repair guide manual download This version contains the basic circuit schematic diagram and chip signal direction and voltage introduction We currently publish in Chinese and the English version will be released soon Basic overview: Antminer T17 single hash board uses a total of 30 hash chips, the model is "BM1397", and the signal direction is sequentially transmitted from U1 to U30. Signal direction: "CLK / CO / BO / RST", transferred from U1 to U30, "RI" is transferred from U30 to U1 It also passes 5 test points for testing and maintenance The five test points are: CLK-CO-RI-BO-RST (Please note: The location of the test points in different voltage domains are also different, please refer to the picture notes) For notes and instructions on the test points, please see the following articles: The whole board has 30 chips, divided into 10 voltage domains, and each voltage domain contains 3 chips For the description of
Post a Comment
Read more

How to repair ASIC miner hash board

How to repair ASIC miner hash board Important parts of ASIC miners – Hash board One  ASIC miner consists of 3 to 5 Hash board, a control board, a casing, and software, among which the Hash board are easiest  to broken. because the ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder due to high temperature which makes the hash board or the mining machine unable to work and no hash rate. How to quickly detective which chips broken it’s the most important when we repairing ASIC miners The Antminer chips fixture fast efficient and easy to use Bitmain Antminer repair inspection tool The ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder du
Post a Comment
Read more

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board?

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board? Antminer S9 hash board Antminer S9 hash board power supply unit Voltage and ground value test of Antminer S9 power supply unit 12V voltage test Test method: adjust the Fluke 15B+ multimeter to the DC gear; the red test lead is placed on the positive pole of the power interface of the hash board, and the black test lead is placed on the negative pole of the power interface. PIC chip voltage test There is a white dot next to the PIC chip, which is 1st Pin. Test method : Adjust the Fluke 15B+ multimeter to the DC gear, measure whether the 1st Pin of the PIC chip has output, and the normal voltage is about 3.3V. If there is no 3.3V, please check the connection status of the hash board test line to see if the hash board is normal; if not, you need to re-program the PIC. MOS tube voltage test There is a black dot on the MOS tube, which is the 1st Pin (Figure 1). This is because the voltage of t
Post a Comment
Read more