Skip to main content

ASIC Miner ICERIVER KAS KS0 Profitability

ASIC Miner ICERIVER KAS KS0 Profitability In the realm of cryptocurrency mining, the Iceriver KAS KS0 miner has garnered widespread attention. Tailored specifically for the Kaspa network's KHeavyHash algorithm, it boasts high hashing power and low power consumption, making it an ideal choice for many miners. In this article, we will comprehensively assess IceRiver KS0 profitability while considering the Kaspa market conditions and the attributes of KS0 miner. Kaspa Market Dynamics Kaspa is a vibrant cryptocurrency network aimed at delivering high performance and scalability for everyday transactions. At the time of writing this article, the Kaspa coin trades at approximately $0.04959. But it's essential to note that cryptocurrency markets are highly susceptible to price volatility. Hence, investors must remain vigilant about market dynamics. Additionally, the Kaspa network's mining difficulty and reward mechanisms play a role in mining returns. Attributes of the IceRiver KS

FPGA MultMiner M1 Miner Evaluation

FPGA MultMiner M1 Miner Evaluation

MultMiner M1 contains 3 hash boards and adopts the classic FPGA chip of Xilinx Company in the United States. The high-quality system integration architecture makes the miner performance of M1 more stable and robust. As a result, it is currently the hardware design and product structure with the highest hash rate in the FPGA miner market.

Miner hardware parameters

Powered by
DC 12V
Power consumption
It varies according to different algorithms (see below for details); it is recommended that the power supply power > 1000W
Volume
430*290*240(after packing)
Weight
330*130*170mm (bare metal)
Working temperature
Net weight 5.4Kg

The official algorithm, power consumption

Currency
Algorithm
Hashrate/G
Power consumption/W
CKB
Eaglesong
31.50
820
 
 
38.00
1150
HNS
Black2B+SHA3
6
850
KDA
Black2S
90.00
1000
TRB
Hybrid algorithm
14.4
860
Remarks: CKB can be overclocked, the hash rate reaches 35G, and the power consumption is 1150W!

Appearance

M1 miner appearance

Measured mining CKB hash rate curve

After running for 24 hours, the lowest hash rate measured was 31.9G, and the highest was 32.9G, and the operation was stable and in line with its nominal value.
mining CKB hash rate curve

Running power consumption and other whole miner tests

Power supply
Standard DC12V
Hash rate
30G @CKB
Power consumption
<850W @CKB 30G
Volume
330*130*170
Weight
About 6KG
Working environment
-10~30℃
Remarks: CKB can be overclocked, the hash rate reaches 35G, and the power consumption is 1150W.
Rated power consumption test:
power consumption test
Noise test:
noise test result
Fan port temperature test:
fan port temperature test

Summary

M1 miner currently supports CKB, HNS, KDA, TRB, and other algorithms.
Using the CKB algorithm, running overnight (16H), the average hash rate is almost stable at 32.3G, of which the lowest is 31.9G, the highest is 32.9G, the power consumption is 847W, the fan port temperature is 36.2 degrees, and the close-range noise is 89 decibels.
The M1 also has an overclocking function. After a simple test, it was found that the CKB was overclocked with a hash rate of 35G and power consumption of 1150 watts.
The content and pictures of this article are from the Internet, compiled and edited by ZEUS MINING.

Comments

Popular posts from this blog

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board?

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board? Antminer S9 hash board Antminer S9 hash board power supply unit Voltage and ground value test of Antminer S9 power supply unit 12V voltage test Test method: adjust the Fluke 15B+ multimeter to the DC gear; the red test lead is placed on the positive pole of the power interface of the hash board, and the black test lead is placed on the negative pole of the power interface. PIC chip voltage test There is a white dot next to the PIC chip, which is 1st Pin. Test method : Adjust the Fluke 15B+ multimeter to the DC gear, measure whether the 1st Pin of the PIC chip has output, and the normal voltage is about 3.3V. If there is no 3.3V, please check the connection status of the hash board test line to see if the hash board is normal; if not, you need to re-program the PIC. MOS tube voltage test There is a black dot on the MOS tube, which is the 1st Pin (Figure 1). This is because the voltage of t

How to repair antminer T17 Hashboard and repair guide manual download

How to repair antminer T17 Hashboard and repair guide manual download This version contains the basic circuit schematic diagram and chip signal direction and voltage introduction We currently publish in Chinese and the English version will be released soon Basic overview: Antminer T17 single hash board uses a total of 30 hash chips, the model is "BM1397", and the signal direction is sequentially transmitted from U1 to U30. Signal direction: "CLK / CO / BO / RST", transferred from U1 to U30, "RI" is transferred from U30 to U1 It also passes 5 test points for testing and maintenance The five test points are: CLK-CO-RI-BO-RST (Please note: The location of the test points in different voltage domains are also different, please refer to the picture notes) For notes and instructions on the test points, please see the following articles: The whole board has 30 chips, divided into 10 voltage domains, and each voltage domain contains 3 chips For the description of

How to repair ASIC miner hash board

How to repair ASIC miner hash board Important parts of ASIC miners – Hash board One  ASIC miner consists of 3 to 5 Hash board, a control board, a casing, and software, among which the Hash board are easiest  to broken. because the ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder due to high temperature which makes the hash board or the mining machine unable to work and no hash rate. How to quickly detective which chips broken it’s the most important when we repairing ASIC miners The Antminer chips fixture fast efficient and easy to use Bitmain Antminer repair inspection tool The ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder du