Skip to main content

ASIC Miner ICERIVER KAS KS0 Profitability

ASIC Miner ICERIVER KAS KS0 Profitability In the realm of cryptocurrency mining, the Iceriver KAS KS0 miner has garnered widespread attention. Tailored specifically for the Kaspa network's KHeavyHash algorithm, it boasts high hashing power and low power consumption, making it an ideal choice for many miners. In this article, we will comprehensively assess IceRiver KS0 profitability while considering the Kaspa market conditions and the attributes of KS0 miner. Kaspa Market Dynamics Kaspa is a vibrant cryptocurrency network aimed at delivering high performance and scalability for everyday transactions. At the time of writing this article, the Kaspa coin trades at approximately $0.04959. But it's essential to note that cryptocurrency markets are highly susceptible to price volatility. Hence, investors must remain vigilant about market dynamics. Additionally, the Kaspa network's mining difficulty and reward mechanisms play a role in mining returns. Attributes of the IceRiver KS

Goldshell KD2 Miner Review

Goldshell KD2 Miner Review

Goldshell's latest KD2 miner: single miner hash rate 6T, power consumption 830W, very friendly to many home users, miner power consumption is low; miner price is also low, it can be said that it is very optimistic.

Miner appearance

The KD2 body is still an integrated aluminum alloy design, with a simple and elegant appearance. The bare metal size is the same as that marked on the official website.
KD2 miner appearance
The nameplate of the fuselage is marked with the power supply specification model and the serial number of the whole miner.
the nameplate of the fuselage
Close-up of the miner's control board interface: you can see the IP reporting button, Ethernet interface, SD card slot, reset button, and status indicator.
miner's control board interface
This test miner fan has dazzling effects, and the later mass production miner is a regular fan without colorful lights.
miner cooling fan
Remove the top case; you can see the distribution of the hash board.
the distribution of the hash board
The whole miner hash board has a total of 96 chips.
KD2 miner hash board
The disassembly is complete, and the following picture shows the combination of all parts.
KD2 miner parts
Assembly is complete; power up the miners! The two lights flash simultaneously when it is turned on, and the green light flashes after the boot are successful.
power up the miner
After opening the miner, start configuring the mining pool;
configuring the mining pool
After running for 24 hours, we look at the mining pool-side hash rate and the local average hash rate separately. The average hash rate on the mining pool side is 6186.27GH/S, and the average hash rate on the miner side is 6326.8GH/S. All are higher than the data marked on the official website.
mining pool-side hash rate
local average hash rate

Operating environment data

The air inlet temperature was 28.1°C, and the air outlet temperature was 47.3°C.
temperature test
Miners can hardly hear any noise during operation, which is the favorite of home miners.
The noise during operation is 53.5db, which is approximately equal to the main box of a desktop computer.
noise test
The power consumption during operation is 792.5W.
miner power consumption

Comparison of measured data and official website data

Project
Official Website Data
Measured Data
Rated hash rate
6TH/S
6.3TH/S
Power consumption
830W/h
792.5W/h
Noise
 ≤55db
53.5db
Operating temperature
 0~35 ℃
28.1℃

Summarize

The quietness and low energy consumption of Goldshell KD2 miners not only take care of the embarrassment of novice retail miners and small-batch miners having nowhere to host, the excellent yield and 81-day static return cycle also make everyone love it. So for many home miners, it is very worthwhile to start.

The content and pictures of this article are from the Internet, compiled and edited by ZEUS MINING.

Comments

Popular posts from this blog

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board?

How to test the voltage and ground value of the power supply unit of the Antminer S9 hash board? Antminer S9 hash board Antminer S9 hash board power supply unit Voltage and ground value test of Antminer S9 power supply unit 12V voltage test Test method: adjust the Fluke 15B+ multimeter to the DC gear; the red test lead is placed on the positive pole of the power interface of the hash board, and the black test lead is placed on the negative pole of the power interface. PIC chip voltage test There is a white dot next to the PIC chip, which is 1st Pin. Test method : Adjust the Fluke 15B+ multimeter to the DC gear, measure whether the 1st Pin of the PIC chip has output, and the normal voltage is about 3.3V. If there is no 3.3V, please check the connection status of the hash board test line to see if the hash board is normal; if not, you need to re-program the PIC. MOS tube voltage test There is a black dot on the MOS tube, which is the 1st Pin (Figure 1). This is because the voltage of t

How to repair antminer T17 Hashboard and repair guide manual download

How to repair antminer T17 Hashboard and repair guide manual download This version contains the basic circuit schematic diagram and chip signal direction and voltage introduction We currently publish in Chinese and the English version will be released soon Basic overview: Antminer T17 single hash board uses a total of 30 hash chips, the model is "BM1397", and the signal direction is sequentially transmitted from U1 to U30. Signal direction: "CLK / CO / BO / RST", transferred from U1 to U30, "RI" is transferred from U30 to U1 It also passes 5 test points for testing and maintenance The five test points are: CLK-CO-RI-BO-RST (Please note: The location of the test points in different voltage domains are also different, please refer to the picture notes) For notes and instructions on the test points, please see the following articles: The whole board has 30 chips, divided into 10 voltage domains, and each voltage domain contains 3 chips For the description of

How to repair ASIC miner hash board

How to repair ASIC miner hash board Important parts of ASIC miners – Hash board One  ASIC miner consists of 3 to 5 Hash board, a control board, a casing, and software, among which the Hash board are easiest  to broken. because the ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder due to high temperature which makes the hash board or the mining machine unable to work and no hash rate. How to quickly detective which chips broken it’s the most important when we repairing ASIC miners The Antminer chips fixture fast efficient and easy to use Bitmain Antminer repair inspection tool The ASIC bitcoin miner hash board consists of many serially connected ASIC chips. When they work, they will be in a high-temperature environment for a long time. In this environment, it is easy to burn the chip or scatter the solder du